KP-508AGF
PAGE 8
OPERATION
Preparing the blender
CAUTION: Do not use the blender to blend hard or dry ingredients
such as coffee beans, ice cubes, mixtures containing fruit
stones cereals and chocolate in lumps as these may damage
the blades.
CAUTION: Do not pour boiling or very hot water or liquids into
the glass jug during use or when cleaning as it can damage the
glass.
NOTE: The maximum operating time is one minute. If you exceed
this time you must rest the unit for thirty minutes.
For best results, the food ingredients should include some liquid
content. This may be water, fruit juice, milk etc depending on the
recipe.
Check that the power cord is disconnected and that the
•
speed control is set to the ‘0’ (Off) position.
The lid is a push fit in the top of the jug. Remove the lid and
•
place the ingredients in the jug. Add any liquid ingredients
first, then any solid ingredients.
Hold back some of the liquid initially. It is better to add more
liquid during blending if required.
Fit the cap into the jug lid.
•
The cap can only be fitted in one
position. Line up the lugs on the cap
with the slots in the lid and fit the cap.
Twist the cap clockwise to lock it in
•
place.
Fit the lid to the jug.
•
Check carefully that the lid is pressed
fully onto the jug.
Line up the jug base with the motor
•
body and place the assembled jug on
the motor body.
NOTE: If the jug does not sit flat on
the motor body, a safety cutout will
prevent operation.
Connect the power cable to a mains
•
outlet.
P
2
0
1
3
4
5
