adept technology Adept Cobra i600, Руководство пользователя

Страница: 75 / 150

Installing Adjustable Hardstops
Adept Cobra i600/i800 Robot User’s Guide, Rev E 75
3. Click Joint 2 . The following screen opens to allow editing the limits:
Figure 5-20. Configuration Manager - Modifying Joint 2 Limits
4. In the Lower Limit field, enter the new value for the J2 lower limit softstop. See
Table 5-8 for recommended softstop values. Note that this value must be a
negative number.
5. In the Upper Limit field, enter the new value for the J2 upper limit softstop. See
Table 5-8 for recommended softstop values.
6. Click Apply . The Apply Changes window opens, as illustrated in Figure 5-15 .
7. Select the required options for saving joint limit values to temporary or
permanent memory. For more information saving changes, click Help
8. Click Write to apply and save the changes.
9. Once the joint limits have been changed and written to memory, the system is
ready to use with the new limits in place.
NOTE: With both adjustable hardstop plates installed, Joint 2 has a
maximum range of motion of 160°.
Table 5-8. Joint 2 Ranges for Adjustable Hardstops
Hardstop Value
Recommended Joint
Limit Softstop
J2 Hardstops installed as
shown in
Figure 5-19 .
± 81° Lower limit: – 80°
Upper limit: + 80°
NOTE : J2 Hardstops can be installed in multiple positions, depending on how
the robot workcell needs to be configured. Each position is spaced 30° apart.