ADENDORFF ML392, Инструкция по эксплуатации

Страница: 8 / 32

７
TECHNICAL DATA
Model No. 10
”(ML392)
12
”(ML393Q)
12
”(ML393)
Planer tables 1085x250mm 1285x310mm 1600x310mm
Thicknesser tables 600x248mm 600x310mm 750x310mm
Cutterblock diameter 75mm 75mm 95mm
Cutterblock speed 4000rpm 4000rpm 4000rpm
Fence tilt 0-45
0
0-45
0
0-45
0
Dust chute 100mm 100mm 100mm
Number of knives 3pcs 3pcs 4pcs
Max thicknessing height 180mm 180mm 220mm
Max removal thickness 5mm(Planing)
/2.5mm(Thicknessin
g) 5mm(Planing)
/2.5mm(Thicknessi
ng) 5mm(Planing)
/2.5mm(Thicknessin
g)
Max workpiece width 250mm 310mm 310mm
NOISE LEVELS
The manufacturer must inform the user concerning:
- the equivalent continuous sound level (Laeq), if the latter exceeds 70 dB(A) at the work
station,
- the sound power level (LWA), if the Laeq exceeds 85dB(A) at the work station,
- the peak pressure level (Lpc), if it exceeds 135 dB(A) at the station,
- the measuring methods used.
REFERENCE STANDARDS: ISO 7960
-
Operating conditions for noise measurements
Annex B one-face surface planers
Annex C one-face thicknessers
-
NF S31-084
– methods for measuring sound levels in a working environment for purpose of
evaluating workers’ daily level of sound exposure,
-
NF S31-069
– test procedure for measuring noise emitted by machine tools.
DEFINITIONS
-Equivalent continuous sound level (LAeq) in dB(A)
– the most frequently given figure
-Characterizes the receiver, gives the value received as a function of the environment, the
distance from the source and/or on the basis of a test procedure for a daily exposure of 8 hours.
-sound power level (LWA) in dB(A)
-characterizes the noise source, gives an intrinsic value defining the noise emitted by this
source independently of the environment.
The table below gives the following data for each work station:
-
the equivalent continuous sound level based on the standard test procedures,
-
the sound power level
-
without load and without dust extraction,
-
under load with vacuuming but without taking into account the noise of the dust extraction
itself.
The nature of the premise, the location of the machine within the premises and the presence of
a vacuum cleaner nearby can greatly influence the noise level. For example, for a cutting speed