ADENDORFF MCJ1000, Сборка и руководство по эксплуатации

Страница: 10 / 13

Upper Belt Pulley (5)
Driving Belt (12)
Protecting Cover (11)
Power Switch (30)
Motor Screw (14)
Lower Belt Pulley (13)
5. Adjust the Driving Belt (12) to the proper steps on the lower Belt Pulley (13) and the
upper Belt Pulley (5) to obtain the desired speed. Make sure Driving Belt is not
crossed into the adjacent steps. The Driving Belt should be placed on the same step
on each Belt Pulley.
Upper Belt Pulley (5)
Lower Belt Pulley (13)
6. Lower the Belt Pulley (13) until there is a light tension on the Driving Belt (12). Tighten
the Motor Screw (14). Make sure the Driving Belt is neither too loose nor too tight.
7. Close the Protecting Cover (11) and insert and tighten the Screws (3).