controlled with the switch is dangerous and must be repaired.
19.
Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool
accidentally.
20.
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power
tools are dangerous in the hands of untrained users.
21.
Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by
poorly maintained power tools.
22.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
23.
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations different from those intended could
result in a hazardous situation.
Service
24.
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained
.
VOLTAGE WARNING:
Before connecting the machine to a power source (receptacle, outlet, etc.), be sure the
voltage supplied is the same as that specified on the nameplate of the machine. A power
source with voltage greater than that specified for the machine can result in SERIOUS
INJURY to the user, as well as damage to the machine. If in doubt, DO NOT PLUG IN THE
MACHINE. Using a power source with voltage less than nameplate rating is harmful to the
motor.
SPECIFICATIONS
Rated Power Input
500 W
Abrasive Belt Speed
5-28 m/s
Abrasive Belt Size
9×533 mm
Net Weight
1.5 kg
※
Due to the continuing program of research and development, the specifications herein are
subject to change without prior notice.
ADDITIONAL SAFETY RULES
1.
Hold power tool by insulated gripping surfaces, because the belt may contact its own cord.
Cutting a “live” wire may make exposed metal parts of the tool “live” and could give the
operator an electric shock.
2.
Hold the tool firmly.
3.
Keep hands away from rotating parts.
4.
Do not leave the tool running.
Operate the tool only when hand-held.
5.
Make sure the belt sander is not contacting the workpiece before the switch is turned on.
6.
Some material contains chemicals which may be toxic.
Take caution to prevent dust
inhalation and skin contact. Follow material supplier safety data.
7.
This tool has not been waterproofed, so do not use water on the workpiece surface.
8.
Ventilate your work area adequately when you perform sanding operations.
9.
Always use the correct dust cover and vacuum cleaners According to the materials used
and applications.
SAVE THESE INSTRUCTIONS.
WARNING! MISUSE or failure to follow the safety rules stated in this instruction manual may
cause serious personal injury.
Содержание MAC AFRIC SSANDB-002
Страница 1: ......
