COPYRIGHT ADENDORFF MACHINERY MART
COPYRIGHT ADENDORFF MACHINERY MART
AIR COMPRESSORS
DIRECT & BELT DRIVEN MANUALS
17
CHECKING THE AIR FILTER
CAUTION. DO NOT USE THE COMPRESSOR WITHOUT THE AIR FILTER FITTED, THIS CAN
DAMAGE THE COMPRESSOR.
1.
Unclip/unscrew and remove the air filter cover.
2.
Remove the air filter element.
3.
Make sure that the air filter is clean and not damaged.
•
If the air filter is damaged contact Adendorff machinery
Spare parts department for a replacement.
•
If the filter is dirty, wash in a solution of warm water and
mild detergent and rinse thoroughly.
Leave the filter to dry completely, once it is dry immerse in clean engine oil and
squeeze to remove excess oil.
WARNING: DO NOT USE INFLAMMABLE SOLVENTS OR PETROL TO CLEAN THE AIR FILTER
4.
Replace the filter to its original position and replace the air filter cover.
REPLACE THE IN-LINE FUEL FILTER
(applicable to certain models)
1.
Set the fuel supply to OFF.
2.
Remove the clip at each end of the in-line fuel filter
3.
Remove the hoses from the in-line fuel filter.
4.
Replace the in-line fuel filter.
TROUBLESHOOTING
If this does not solve your problem, please contact Adendorff Machinery.
Note The flow direction on
the in line fuel filter as you
replace the clips.
SYMPTOM
PROBABLE CAUSE
REMEDY
The compressor petrol engine
fails to start
Ignition switch is off
Set the ignition switch to “on:”
Not enough oil in the engine
Add more oil
No fuel
Add more fuel
Spark plug not working correctly
Change the spark plug
The compressor engine is
difficult to start
The air filter is dirty
Clean the air filter
The fuel filter is blocked
Clean the fuel filter
