ADENDORFF DWHPW2200 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 28

ADENDORFF DWHPW2200 Скачать руководство пользователя страница 17

HOW TO APPLY CHEMICALS AND CLEANING SOL VENTS

Applying chemicals or cleaning solvents is a low pressure operation.

r-.JOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach.

To

Apply chemicals:

1. Press chemical hose onto barbed fitting located near high pressure hose on of pump as

shown.

2 Place other end of chemical hose with filter on it into container holding chemical/cleaning

solution.

NOTE: The chemical/water ratio is 7: 1, for every 7 gallons of water pumped, 1 gallon of

chemical/cleaning solution will be used.

3. Install low pressure (black) nozzle into quick connect fitting of spray wand, see How To Use

Spray Wancl paragraph in this section.

4. Nter use of chemicals, place chemical hose into container of clean water and draw clean water

through chemical injection system to rinse system thoroughly. If chemicals remain in the pump

ii could be damaged. Pumps damaged due to chemicals will not be covered under warranty.

NOTE: Chemicals and soaps will not siphon when spray wand is in the high pressure setting.

«
...
15
16
17
18
19
...
»

Содержание DWHPW2200





























Отзывы:

Нет отзывов