background image

14

0 = OMIT ZONES

[ent] to Select

6

6 = Walk Test

ent to select

ent

PIN + ent

1=TEST ALL ZONES

2=SELECTED ZONES

1

NO ENTRIES

WALK TEST ACTIVE

ESC to abort

1001 FINAL

#=TEST ENT=START

2

>A

1002 EXIT

#=TEST ENT=START

1002 EXIT

TEST ENT=START

#

ent

Walk Test (User Level 5 and Above)

Purpose

The 

Walk Test

 option provides a method of testing the zones to

ensure that they are operating correctly. There are two options
available:
1. All zones can be tested
2. Selected zones can be tested

In both cases the sounder indicates an open zone. The test is recorded
in the log. Wire-free zones also show the received signal strength as a
percentage

Selecting Walk Test

Enter the QUICK MENU. Press the key 6 followed by the ent key. When
Walk Test is selected, 

Test All Zones

 or 

Selected Zones

 displays.

All Zones

Choosing 

All Zones

 (press key 1) starts the test immediately. No

selection is necessary as all valid zones are included in the test. The
sounder operates whenever a zone is opened and stops when all
zones are closed.

Note:

The Test All Zones option only tests zones which can

be omitted from the system.

Selected Zones

Choosing the Selected Zones option by pressing key displays the first
zone on the system. Each zone is displayed in turn by using the >A or
<B keys. When the zone to be included in the test is displayed, press the
key. Other zones can be included in the test in the same manner. When
all of the required zones have been selected, press the ent key to start
the Walk Test.

Note:

The Selected Zones option includes non-omittable
zones.

Ending Walk Test

To abort the walk test option press the esc key, otherwise the walk test
option remains active for 20 minutes after the last key press.

Содержание galaxy 128







































Отзывы: