ADEMCO AHDR1, Руководство пользователя, Страница: 64 / 70

Single-Channel Digital Video Recorder
63
Appendix C — Troubleshooting
Problem Possible Solution
No Power
Ÿ
Check power cord connections.
Ÿ
Confirm that there is power at the outlet.
No Live Video
Ÿ
Check camera video cable and connections.
Ÿ
Check monitor video cable and connections.
Ÿ
Confirm that the camera has power.
Ÿ
Check camera lens settings.
Live Video Very Bright
If a cable is attached to the “Loop” connector,
make certain it is connected to a properly
terminated device.
DVR Displays “Error” Confirm that the hard disk drive is installed.
Cannot Set Network Settings Make certain you have a Premium Model.
REC LED is Lit but DVR is not
recording Unit is set in Timer Mode. It will only record
during designated times.
DVR has stopped recording
If hard disk drive is full, you will either need to
delete video or set the DVR to the Overwrite
Mode.
DVR displays an error message
stating that the last recorded
image date and time is later than
the current date and time setting
of the DVR.
The DVR will automatically reset the time and
date of the unit, according to the time and date
of the last recorded image. If this is not the
correct time and date, reset the time and date
manually. If the correct time and date is earlier
than the last recorded image, any video with a
later time and date will be lost when resetting
the correct time and date.