A
A
D
D
E
E
L
L
s
s
y
y
s
s
t
t
e
e
m
m
Instruction Manual
Instruction Manual CB304A_R05 Eng
ADEL system srl
Via L. Barchi 9/B, 42124 Reggio Emilia (Italy)
– Tel. ++39-0522-345518
Fax. ++39-0522-345551
– Internet: www.adelsystem.com
CB304A (15 Cells Pb-Gel, 25 Cells Ni-Cd)
Intelligent Battery Charger
Thank you for having chosen one of our products for your work. We are certain
that it will give the utmost satisfaction and be a notable help on the job.
•
General Description:
Application
CB battery charger is a range of microprocessor-power supplies witch correctly charge open or sealed
lead-acid batteries, Gel batteries and Ni-Cd batteries at all-time maximizing performance and life span.
Charge the battery in multi-stage principle, Fast and Trickle and automatically the device check the battery
quality in a lifetime to prevent any risk of damage to the battery and allow leaving the charger permanently
connected. Before begin the operations of installation consult the manual.
•
Mains Characteristic
•
Nominal Input Voltage: 115 - 230 -277Vac
•
OUTPUT 1: for connection to Battery
•
Fast and trickle battery charge In according to DIN 41773
•
Signalling: fault status of the battery
•
Overload and short circuit protections
•
Power limited Battery output
•
Safety isolation in according with EN 60950
•
Degree of protection IP20
•
Rail DIN mounting
Vac Input
Charging Level
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
OUTPUT N°1
Battery module
Fault Status
Battery Type
Configuration Jumper
Monitor Led:
•
Fault
•
Diagnosis
