ADEEPT Smart Car Kit, Руководство пользователя

Страница: 30 / 58

www.adeept.com
26
Effect diagram after assembling
Put an M3 nut on the car first, and then insert two M2*10 screws through the buzzer module,
M3 nut, the long slot on the plate at the back of the car, and then an M2 nut below the plate in
turn. During the course, you can hold the nut underneath, insert the screw through these, and
tighten them.
The M3 nut here is to support the module in height.
Assemble the following components
Assemble the Adeept Passive Buzzer Module
Adeept Passive Buzzer
Module x1
M3 Nut x2
M2 Nut x2
M2*10 Screw x2