7
M501660-210512-Rev003-UM-e
Evaluation of the Body Mass Index
Compare the determined value which corresponds to those being used by the WHO.
BMI below 18,5
The patient is under the regular standard and does not got enough weight. An increase of
weight is recommended. Please consult a professional.
BMI between 18,5 and 24,9
The patient got a normal weight. If he feels well there is no need for a change.
BMI between 25 and 30
The patient is slightly overweighed to pre-obese. A reduction of weight is indicated or, is
necessary if the state of health is already affected (e.g. diabetes, high end blood pressure,
heart diseases).
BMI over 30
Reduction of weight is imperative. To visit a doctor is highly recommended.
Connecting additional devices
Connection of printer, PC or remote-display will be done with the RS-232 interface. For connection of
additional devices kindly ask your local representative or authorized ADE dealer for further instructions.
Print out a record
The scales must be at standstill. The standstill status symbol
must appear at the screen. Press the
ENTER key to send the data to the serial interface.
Note: Printing is not possible if the net weight is 0. The print function only produces one print-out. A reset
is required to print out another copy.
Error Messages
Error Codes
Description
Solution
Load cell wires to indicator are
incorrectly connected; or shorted, or
opened; or ADC/ load cell are being
damaged
Make sure wires are in good order
and condition and correctly
connected. Replace load cell or
ADC chip. Service is required.
Weight reading exceeds the zero limit
after switching the scale on.
Make sure scale platform is empty.
Weight reading is below the zero limit
after switching the scale on.
Install platform on scale.
Otherwise the zero calibration/
adjustment have to be done by
authorized personnel.
Weight reading exceeds load limit.
Reduce load on scale until weight
value can be displayed.
Weight reading below load limit.
Service by authorized personnel
required.
Configuration or Calibration parameters
are not correctly set.
Contact your local dealer / supplier
for calibration purpose.
