ADE Juwel 1, Руководство по эксплуатации

Страница: 7 / 24

Juwel-200624-Rev010-UM-en 6
4. CONTROLS AND SAFETY DEVICES
4.1 Controls
The Vertical slicers are switched on and off electrically by means of two buttons, I (start) and O (stop). Both
feature a white lamp which indicates when the blade is rotating.
The machine features a safety switch in the blade guard connected with a no voltage relay. Every time the
supply voltage is cut off, the button “I” (start) must be pressed to start the machine up again.
4.2 Mechanical safety devices
- With the exception of the actual cutting section, the blade is totally protected by an irremovable guard
which cannot be removed.
- The product carriage can only be removed if the slice assembly covers the blade and the graduated knob
is set to “0” (zero).
- The slice assembly can only be opened (using the graduated knob) if the product carriage is secured in
its normal operating position.
- The blade can only be removed using the blade-removal tool supplied.
- None of the safety devices can be removed; dismantling or tampering with them would make the machine
unsafe, and result in the manufacturer no longer being responsible for any accidents.
4.3 Testing
- Make sure all the slicer components are assembled properly.
- Check the handwheel securing the blade guard is locked in place.
- Press the start button and check the machine can be switched on and off.
- Check the sliding of the product carriage and product press.
- Check the sharpening device works properly.
- Check the opening of the slice assembly.