ADE HWZ Series, Руководство по эксплуатации

Страница: 4 / 20

4 HWZ-190214-Rev006-UM-en
4. Set up of the scales
1. Carefully remove the delivery contents from the packaging.
2. Place the scale on a stable, horizontal surface. Do not place the scale on a shaky or vibrating
table as this will cause distortion of measurement results.
3. To align the scale, adjust the four feet of the scale so that the air bubble is exactly in the centre
of the spirit level.
4. Remove the weighing platform from the separate packaging and insert it carefully into the holes
on the top of the scale.
5. Connect the power cord to the connector on the bottom of the scale. Switch on the scale. The
on/off switch is located on the right-hand side under the housing. When switching on the scale,
the weighing platform must be unloaded. The scale runs through a test programme and
acknowledges the end of the routine with an acoustic signal.
If the weighing platform is loaded when switching on the scale, the scale will not be properly
calibrated and ready for use.
Switch off the scale and repeat the switch-on process.
6. The scale is now ready for use.
7. For accurate measurement results, the item to be weighed must be placed in the middle of the
weighing platform. The item to be weighed should not protrude beyond the weighing platform.
5. Overview
No.: Designation Description
1
Weight Weight window
2
Unit weight Unit weight window
3
“Numeric keypad”
0 ~ 9, for data entry to manually enter a value for tare
weight and sample size
4
“Spirit level” For levelling the scale
5
Count Quantity window
6
“Comma key” For setting decimal places
7
Recharge Indicates the charging process of the battery
8
“Function keys” Used to trigger predefined functions
9
C Used to delete incorrect entries or to return
2
3
4
1
6
7
8
5
9