ADE HWZ Series, Руководство по эксплуатации

Страница: 10 / 20

10 HWZ-190214-Rev006-UM-en

You can add more products. To do this, press each time. This process can save up to 99
entries or the full capacity of the “Weight” window.

To view the saved total value, press the key. The total sum is displayed for 2 seconds.

To print the total number of units, first press and then . The prerequisite is the optional
RS232 data interface.

To clear the memory, first press to view the total sums and then press the key to clear
all values from memory.
8.4.5 Automatic totaliser

The scale can be set to automatically add total sums when a weight is placed on the scale. It is
no longer necessary to press the key to save values. However, the key is still active
and can be pressed to save the values immediately. In this case, the values will no longer be
saved when the scale returns to zero.

See section 9 (parameters) for details on setting the automatic totaliser.
9. Backlight and parameter setting
9.1 Backlight of the LCD display

The backlight of the LCD display can be set to be permanently on; it can also only be switched on
when a weight is on the scale; or it can be turned off.

To adjust the backlight, press and hold down the key for 6 seconds.

The “Weight” window shows the current setting for the backlight “EL xx”.
EL Au Automatic backlight when a weight is placed on the scale or when a key is pressed.
EL OFF Switching off the backlight.
EL On Permanent activation of the backlight

Press the key to select the desired setting.

Confirm with .
9.2 Scale-specific parameters

To set the parameters, go to a saved menu. To do this, you have to enter a code.

To set the parameter menu, press the key during the test run of the display after switching
on.

The “Weight” window shows “PLn”: Enter your code.

The default code is “0000”. With the help of the parameter menu (see below) it can be changed
as desired. Press key 4 times and confirm with the key.

The parameter menu has 11 functions. To navigate through these functions, press the key.
The “Weight” window shows the names of the functions. To select a function, press the key.
To navigate through the values of this function, press . Press to save the selection.

You can press the key at any time to return to weighing mode.
C
0