5
Hanseat-210617-Rev008-UM-en
4. USING THE SLICER
4.1 Operating procedure
1) Set the knob "A" with scale division to "0" (zero).
2) Pull the food carriage on the carriage arm "B" as far as possible in the direction of the operator.
3) Lift the remnant holder "C" using the handle "D" provided for this purpose. Place the product
on the food carriage with the machine switched off and lower the remnant holder on or behind
the food. Secure the food using the guide rail integrated in the food carriage. Always make sure
that a small clearance remains between the guide rail and the food so that the food is not
jammed and thus prevents sliding. Tighten the fixing screw to prevent slipping of the guide rail.
4) For safety reasons, the remnant holder is firmly connected to the machine. If the food is longer
than the range of motion of the remnant holder, the latter is placed loosely on top. If the length
of the food exceeds the range of motion of the remnant holder, the latter is placed behind the
food. Set the desired slice thickness using knob "A". Selection of slice thickness can be infinitely
variable between 0 and 15mm.
5) Press the green operating button "E" to switch it on.
6) By firmly holding the handle on the food carriage arm "B", move the food carriage back and
forth to slice the food.
7) After slicing has been completed, switch off the machine using the red stop button "F" and reset
the slice thickness setting knob "A" for safety reasons.
I
G
D
J
B
C
F
A
H
E
K
L
M
Содержание HANSEAT 250 Series
