ADE Grace KE 1723, Руководство по эксплуатации

Страница: 18 / 64

Operation
18 Kitchen scales KE 1723 | KE 1724 | KE 1725 | KE 1726
Operation
Weighing
1. Place the scales on an even, firm, and dry surface. Carefully position the scales in
order to avoid hard impacts to the sensors/feet and therefore to avoid damage.
2. Switch on the scales by pressing with a little force on the weighing surface for
2 seconds. Wait a moment until “0” appears on the display.
3. Choose the desired unit of measurement by repeatedly touching UNIT.
You can choose between “g” (grams), “Oz” (ounces), “lb” (pounds), and “ml” (millilitres).
Pay attention to the indicator on the display.
Choose “ml” if you would like to weigh liquids.
4. If you want to weigh something in a container, now place the container without
anything in it onto the weighing surface. Otherwise, proceed as described in point 6.
5. Press T / .
Depending on the selected unit, “0 g”, “0.0 Oz”, “0.000 oz” or “0 ml” is displayed.
6. Put the substance to be weighed in the container or place it on the weighing surface.
The measured weight is shown on the display.
7. Read off the measured weight and remove the item or substance from the
container or the weighing surface.
Set the scale to zero
If the display still shows values even if the weighing surface is empty (e.g. if the scales
are not optimally positioned or a TARE value is still displayed, see next section), you
must set the scales to zero.
−
Briefly press T / 1x.
Using the tare function (TARA)
This function is practical, for example, when baking, if you would like to add another
ingredient to the ingredients already on the scales.
1. Press T / in order to set the scales back to “0”.
If the weight on the weighing surface is greater than 100 grams, “TARE” is
shown on the display (tare function).
2. Add the new substance. The weight of the added substance is shown on the display.
Druckbuch GRACE.indb 18 18.04.2017 10:58:21