ADE CK 1927, Руководство по эксплуатации

Страница: 23 / 86

Receiving the time signal
23
CK 1927 XL radio-controlled wall clock
English
Checklist when data is missing on the display
No data display from the time signal transmitter
1. Check whether the location of the radio-controlled clock is suitable, see
“Choosing a location”.
2. Restart reception manually, see "Manually starting signal reception".
3. Wait until the radio-controlled clock automatically switches to receiving mode at
a later point in time. The reception is usually better at night.
4. Manually perform the settings if reception is not possible at your location, see
"Setting the time and date manually".
Setting the time and date manually
‚
If there is more than approx. 20 seconds between two pushes of a
button, the setting process automatically ends and you will have to
repeat it.
‚
If you press and hold the or buttons, the displayed values will be
increased or decreased more quickly.
1. Press and hold down the button until “BEEP ON” appears on the display.
2. Use the or button to set whether a beep should follow each press of a button
(“ON” = default setting) or switch this function off (“OFF”).
3. Press in order to save the settings. “00” flashes in the display for the time zone
you are in (“00” is the default setting for the European mainland).
4. Proceed as previously described:
−
Press the or button to set the desired value.
− Press to save a setting.
5. You should set the following:
−
Hours
− Minutes
− Year
−
Month
−
Day
−
Language (relates exclusively to the weekday indicator)
6. Finally, press to conclude the procedure.