
Charging function via USB
36
Radio alarm clock CK 1706
Interrupting the alarm for 24 hours
−
Press the multi-function knob for approx. 2 seconds or 1x on the button to stop
the alarm. After 24 hours, the alarm will be triggered again.
Auto-stop function
−
The alarm switches off automatically after approx. 30 minutes if you do not press a
button. After 24 hours, the alarm will be triggered again.
Repeat alarm (snooze function)
−
Press the multi-function knob 1x when the alarm sounds.
The alarm signal becomes silent and the alarm icon or flashes in the display and
is displayed.
After 9 minutes, the radio alarm clock switches on again and wakes you up again.
This procedure can be repeated multiple times.
Turning the alarm off completely
−
Press the
or
switch to completely turn off the respective alarm function. If
an alarm function is disabled, it no longer appears on the display.
Charging function via USB
You can charge devices such as smartphones or MP3 players via the USB ports.
Pay attention to the manufacturer’s instructions for the device you are
connecting.
Do not use the charging function during radio operation, as this may
result in noise interference.
−
Connect the USB socket and the external device using a USB cable (not included).
During the charging process, an animated battery icon appears in the display next to
the temperature indicator.
Other functions
Setting the display lighting
−
Briefly press the multi-function knob repeatedly to select the desired brightness
level or completely turn off the display lighting.
Replacing the backup battery
1. Open the battery compartment on the underside using a fine Phillips screwdriver.
2. Remove the battery compartment cover and remove the old battery.
3. Slide the new battery under the two retaining tabs and then push them down with
a little force so that the battery is firmly under the retaining tab and audibly clicks
Druckbuch CK 1706 DE EN.indb 36
29.06.2017 16:29:31