
Radio operation
33
Radio alarm clock CK 1706
English
Switching off
−
Press the button to switch off the device.
“off” is shown on the display.
Radio operation
1. Switch on the radio alarm clock and select FM as the audio source.
2. Press the
button repeatedly to set the desired radio station. If a station is
received in stereo quality, "ST" is also shown in the display.
3. If necessary, improve the radio reception by first setting a different frequency. Turn
the
button to set the frequency very precisely. If this does not work,
change the position of the wire antenna.
Refer to the chapter “Basic functions” for further information.
Playback via USB/micro SD
General information
Playback via USB and micro SD card works identically and is therefore described
together.
The radio alarm clock supports various audio formats, such as MP3, WAV or FLAC.
The audio files can be located directly on the data storage device (“flat”) or in
directories, where the directories should preferably not contain any sub-directories.
The slot for the micro SD card is located in the battery compartment.
−
Insert: Slide the card to the bottom as shown.
−
Remove: Push the card slightly into the slot. The card is then pushed out by
spring force.
Use a USB stick, not a USB disk.
Playback
1. Connect the USB stick or insert the micro SD card into the card slot.
2. Switch on the radio alarm clock and select USB or SD as the audio source.
Playback starts automatically.
−
Pause and restart playback: Press the button.
−
Select next track: Turn towards .
−
Select previous track: Turn towards .
Refer to the chapter “Basic functions” for further information.
Druckbuch CK 1706 DE EN.indb 33
29.06.2017 16:29:31