Page 24 of 39
Fleet One Terminal Installation Manual
Put the antenna unit on the mounting flange and use 6 sets of M6 x 35 Hex head
screw bolts with flat washers into the threaded holes of the antenna unit’s mounting
base via the mounting flange’s holes.
Tighten the flat washers and bolts to the antenna unit in order to secure it to the
mounting flange.
Alternatively it can be mounted on the long pole. The physical dimension of a long pole shall
be preferably a 2 meter height with its diameter ranges from Ø35 to Ø 50mm. In addition, the
optional pole mount kit is available for the installation of the antenna unit onto the long post.
2.2 Installation of BDU
The BDU’s box is unpacked and the following items should be checked whether they are
present:
BDU
1 x Primary Handset with Cradle
1 x Ethernet Cable
1 x DC Power Cable
1 x Inmarsat 505 laminated card
1 x Wi-Fi Antenna
Hardcopy Quick Start Guide
CD Format User Manual
The following important notes are to be followed for the selection of a location before
installing the BDU:
The unit is not water proof and it has to be kept away from water splash.
The ambient temperature and humidity in the selected location must the requirements
given in the unit’s specification.
Ambient Temperature
-25ºC to +55ºC
Relative Humidity
Up to 95% at +40ºC.
The unit shall be kept away from direct sunlight.
The unit shall be placed away from any high vibration and shock areas (for example,
motor engine and generator) as far as possible.
The unit shall be kept away from other electronic equipment.
The unit has to follow the recommended compass safe distance of 1m to prevent
interference to a magnetic compass
