Page 4 of 16
IRIS Touch
Quick Installation & Maintenance Guide Version 1.0
1.
Introduction
The IRIS Touch
offers cost effective Alarm over IP (AoIP) for the commercial and residential sectors.
All IRIS Touch
diallers are certified as suitable for all Grade 4 systems with an Alarm Transmission
System (ATS) configuration SP6 for single path, or ATS configuration DP4 for dual path (IRIS Touch 240
only).
The IRIS Touch
is based on Chiron’s successful IRIS Touch range of AoIP diallers with the same
hardware and software used in all IRIS diallers; with the same level of security and features provided to
military, governments, banks and commercial industry markets.
The IRIS Touch
offers a touch screen as standard for configuration, local alerts, and allows diagnostic
and tests to be performed by the engineer. Polling and alarm over communication paths of Ethernet and or
GPRS (3G, 4G and CDMA on request) to the monitoring centre.
This manual describes a quick guide to the installation of products from the IRIS Touch
. For the full
manual, including multi-lingual versions, please visit our website at:
http://www.chironsc.com/downloads_security.html
2.
Product Features
Features
IRIS Touch
200
220
240
Fire retardant enclosure
Touch screen
Ethernet
̶̶
1
1
GPRS
̶̶
Dial capture
Relays
3
3
3
Inputs (Pins)
4
4
4
Serial RS485
Serial TTL
RS232 (Basic or Full)
Basic
Text messaging
̶̶
Multi language menus
VoIP & SIP services
Option available on request
3G / 4G / CDMA
3.
Package Contents
Contents dependent on model type:
Dialler board in plastic housing
Ethernet cable (IRIS Touch 220 & 240)
GSM antenna (IRIS Touch 200 & 240)
Stylus
18k Ohms sense resistor
