AddPac AP-IP230, Инструкция по установке и эксплуатации

Страница: 151 / 164

AP-IP230 IP Phone Installation Guide Version 1.0
AddPac Technology Proprietary & Documentation
151
Chapter 7. Appendix
This Appendix provides information about the Pinout specifications of the following cables used with
AP-IP230 IP Phone.
� Console Port Signal and Pinout (RJ-45 to DB9)
� Ethernet UTP Cable Assemble (RJ-45 to RJ-45) Pinout
[UTP Cable (RJ-45 to RJ-45) Pin Out]
In order to connect the LAN port of this equipment with other equipments (i.e. HUB), the RJ-45 to
RJ-45 Ethernet Cable is used. The RJ-45 Connector Pin sequence is provided below and the signal
and Pinout specifications are enlisted at the below table.
(Picture 7-1) 100Base-TX RJ-45 Connector
[Table 7-1] Serial Ethernet Cable Signal and Pin Out
RJ-45 Signal Direction RJ-45 Pin
1 Tx + → 1
2 Tx - → 2
3 Rx + ← 3
4 - - 4
5 - - 5
6 Rx - ← 6
7 - - 7
8 - - 8
1. These specifications are for ethernet direct cables connecting this equipment and HUB.
2. For IP Phone to IP Phone or IP Phone to PC connection, the Cross Cable must be used.