For any further information on ADDON product, please visit our website:
http://www.addon-tech.com
28
7) The device will reboot and you will probably be disconnected.
8) After 60 seconds you can actually plug the second NHP5010 and connect to it.
9) Open the management page for the second NHP5010, change the SSID and
select
PLC Powerline
and click
Apply
(go back to point 4,5 and 6)
10) Repeat these steps for any NHP5010 Wireless Powerline Adapter that you have
at home.
11)
IMPORTANT:
Go back to
Internet Protocol Version 4 (TCP/IPv4)
Properties
(check
b) Login to the management page
from point 1. To point 6.) and
select
Obtain an IP address automatically
and
Use DNS server address
automatically
and then click OK.
