For any further information on ADDON product, please visit our website:
http://www.addon-tech.com
12
3. Click
Apply
to save the changes (your wireless connection will be
disconnected automatically if you are using the wireless connection when you
setup the wireless security).
4. Your wireless connection will be disconnected automatically if you are using
the wireless connection when you setup the wireless security. Please wait for
a few seconds and reconnect to it by entering your network key. Make sure
HP5100 is connected to the router before reconnecting the PC or laptop to
NHP5010 by wireless.
5.
IMPORTANT:
If you want to change the Wireless Network Name (SSID),
please go to page 13. If you have finished and you want to logout from the
management page, please go back to
Internet Protocol Version 4
(TCP/IPv4)
Properties (check
b) Login to the management page
from
point 1. To point 6.) and select
Obtain an IP address automatically
and
Use
DNS server address automatically
and then click OK.
6. If you cannot access the Internet after reconnecting to wireless Homeplug,
then turn off NHP5010 and turn it on again.
7. Connect your PC or laptop to NHP5010 again. You should be able to access
the Internet.
