Additel ADT282, Руководство пользователя

Страница: 24 / 34

20
3. Dual-Channel Thermometer Readout
Dual-Channel Thermometer is one of the main functions of the device
(figure 4). It can measure RTD and TC, both channels can be displayed at
the same time, each channel measures a signal separately.
The measured signal value of the channel is displayed in the middle of
the channel in real time, and the current signal type information is displayed
on the upper left. Click the icon to switch the signal type.
Click the menu
icon in the upper right corner to set the current channel in the pop-up
menu. Click the zeroing icon (when the channel supports it) to perform
the zeroing operation on the current channel. If the signal type selected in
the channel has multiple values for display (for example, when measuring
TC, in addition to the temperature value, there are also the original mV
signal value and the cold junction temperature value), then the channel will
also display the main signal value. Other signal values are shown below.
The icons
and in the upper right corner indicate whether the
current temperature measurement channel is open and being displayed,
click these icons to open or close the corresponding channel.
Figure 4 Thermometer