Addictive audio 100.1D, Руководство по установке и инструкция по эксплуатации

Страница: 4 / 32

at the marked locations and firmly fasten the amplifier in place with the mounting
screws supplied in the accessory kit.
Caution
Before drilling or cutting any holes investigate the layout of your automobile
thoroughly! Take care when working near the gas lines, hydraulic lines and
electrical wiring.
WARNING
This power amplifier has a protection feature to prevent any damage from misuse
or faulty conditions - excessive heat, short circuit speakers or overload. If the unit
senses one of the above conditions, the protection indicator will light and the
system will shut down. To diagnose the problem turn all levels down, all power off
and check the installation for possible wiring mistakes or shorts. In the event the
amplifier shuts down due to excessive heat under adverse conditions simply allow
time for the unit to cool down at which time, the protection indicator will not light.
Power Supply Connections
The +12VDC and GROUND wires should be heavy gauge copper wire with heavy
insulation and of the same gauge. Please see the chart below for recommended
gauge and fuse.
50.1 60 AMP FUSE 4 GAUGE
100.1 90 AMP FUSE 4-2 GUAGE
200.1 150 AMP FUSE
*
0 GUAGE
* One 150 amp ANL fuse and holder is supplied with every 200.1 amplifier. This fuse is to be used
within 8” of amplifier. It is recommended to place another 150 amp ANL fuse within 16” of the main
battery.
In addition, it has a 12V remote control wire and it should be 14AWG-18AWG.
It is preferable to have longer speaker wires and shorter power supply wires to
minimize power losses.
4