Technical description Chapter 4
APCI-7501
5
4 TECHNICAL
DATA
4.1
Electromagnetic compatibility (EMC)
The board has been subjected to EMC tests in an accredited laboratory in
accordance with the norms EN50082-2, EN55011, EN55022.
The board complies with the limit values set by the norm EN50082-2 as follows:
True
value Set
value
ESD .................................................................. 4 kV
4 kV
Fields ............................................................... 10 V/m
10 V/m
Burst ................................................................. 4 kV
2 kV
Conducted radio interferences ......................... 10 V
10 V
Noise emission
B class
WARNING!
The EMC tests have been carried out in a specific appliance
configuration. We guarantee these limit values
only
in this
configuration
Consider the following aspects:
- your test program must be able to detect operation errors.
-
your system must be set up
so that you can find out what caused errors.
4.2
Physical set-up of the board
The board is assembled on a 4-layer printed circuit card.
131 mm
99 mm
Breadth:
19,2 mm
Weight: 156
g
Installation in:
PCI 5 V / 32-bit slot
Connection to the peripheral
37-pin SUB-D
male connector
