AdderView GEM
Installation and Use
Page 13
L1
- AdderView GEM locks on to active ports only during autoscanning (default)
L2
- AdderView GEM locks on to every port during autoscanning
L3
- AdderView GEM powers on in autoscan mode and locks on to active ports only
L4
- AdderView GEM powers on in autoscan mode and locks on to all ports
L5
– Allow the mouse to run at any speed (default)
L6
– Don't allow the mouse to run at very slow speeds
L7
- Cascade query code = AD (default)
L8
- Cascade query code = EF
T1
- 2 seconds autoscan delay time before switching to next port (default)
T2
- 5 seconds autoscan delay time before switching to next port
T3
- 7 seconds autoscan delay time before switching to next port
T4
- 10 seconds autoscan delay time before switching to next port
T5
- 15 seconds autoscan delay time before switching to next port
T6
- 20 seconds autoscan delay time before switching to next port
T7
- 30 seconds autoscan delay time before switching to next port
T8
- 60 seconds autoscan delay time before switching to next port
U1
- AdderView GEM channels are switchable using a 3 button mouse
or IntelliMouse (default)
(AdderView GEM reports 2 button mouse mode to PCs)
U2
- AdderView GEM channels are not switchable using 3 button mouse
or IntelliMouse
(AdderView GEM reports 2 button mouse mode to PCs)
U3
- AdderView GEM channels are not switchable using 3 button mouse
or IntelliMouse
(AdderView GEM reports 3 button mouse mode to PCs)
U4
- AdderView GEM channels are switchable using 3 button mouse
or IntelliMouse
(AdderView GEM reports IntelliMouse mode to PCs)
U5
- AdderView GEM channels are not switchable using 3 button mouse
or IntelliMouse
(AdderView GEM reports IntelliMouse mode to PCs)
U7
– Cycle between all ports when switching with ‘H Tab’ or three button
mouse (default)
U8
– Cycle between active ports only when switching with ‘H Tab’ or three
button mouse
Содержание GEMAV2GEM
Страница 7: ...AdderView GEM ...
