25
FUR
THER
INFORMA
TION
RX - Transmitters
Transmitters
This page lists the available transmitters on the network which
aren’t under AIM control -
Note: ALIF1xxxT and ALIF2xxxT units are not
discoverable using this process
. In the Actions column you can perform the
following functions for each listed transmitter:
•
Click
to view the configuration page of the transmitter.
•
Click
to flash the front panel indicators on the transmitter to
assist with identification.
• Click the X button in the top right corner to return to return to the
RX pages.
To get here
You can access this page in two ways:
1 On the console keyboard attached to the RX unit, access
the OSD by pressing
CTRL + ALT + C
.
2 Click the
Network
link.
OR
1 Connect a computer to the same network as the RX unit.
2 Run a web browser and enter the IP address of the RX
unit:
http://169.254.1.32
(this is the default address when
using SFP port 3). If you are using SFP port 4 then the
default address will be
http://169.254.1.42
If the IP address is unknown, press the small button on the
front panel next to the OLED screen to reveal the value
for
IP Address 3
(or IP Address 4)
and use that address.
3 Click the
Transmitters
link.