ADDER ADDERLink INFINITY 4000, Руководство пользователя, Страница: 17 / 82

16
INST
ALLA
TION
CONFIGURA
TION
OPERA
TION
FUR
THER
INFORMA
TION
INDEX
PERFORMING A MANUAL FACTORY RESET
A factory reset returns ALIF4000 unit to its default configuration.
To perform a manual factory reset
1 Power on the ALIF4000 unit.
2 Use a long narrow implement
(e.g. a straightened-out paper clip)
to press-and-hold the recessed
reset button on the front panel
for roughly ten seconds, until the
status indicator turns
blue (Note:
alternating red/green indications will
occur during the ten second period
while the button is still pressed) .
3 Release the reset switch. The
indicator will remain
blue
for
a short while (less than ten
seconds) while ALIF4000 unit configures itself and should then change to
green
if all
connections are correct; or
orange
if one or more of the video, USB and/or network
links are missing.
Note: If you are performing a factory reset and intend to disconnect the power immediately
after the reset, you must wait at least 30 seconds after you have released the reset button
for it to complete the process.
AdderLink