31
INST
ALLA
TION
CONFIGURA
TION
OPERA
TION
Fur
T
her
INF
orm
A
TI
o
N
INDEX
Initial configuration
To perform the initial configuration, you need to connect the ALIF 2112T to an IP
network and use a computer located on the same network to connect to it.
To perform the initial configuration
1 Connect the ALIF 2112T to an IP network (using the
VNC port
) where a suitable
computer is available on the same subnet (please see the section
VNC network link
for connection details).
2 Use a computer connected to the same subnet of the network. On that
computer, locate and select the VNC viewer icon
A connection details
dialog will be displayed:
options button
Provides a range of viewer and connection settings
-
MORE [+]
Enter the ALIF 2112T address
here and click OK
If required, select the
encryption mode
5 Enter
admin
as the
Username, leave the password entry blank and click the OK
button. The viewer window should now open:
Click the Configure button
Use the various options
(particularly the ‘Unit
Configuration’ and ‘Network
Configuration’ options) to
arrange the ALIF 2112T to
suit your requirements.
See
Appendix F -
Configuration menus
.
6 Click the Configure button to display the Configuration menu:
3 In the ‘Server:’ entry, type the address:
192.168.1.42
4 Click the OK button. The viewer window may open straight away (if so continue at
step 6) or the system may require user authentication in which case an authentication
dialog will be displayed:
Note: To ensure that the Configuration menu is correctly displayed within the VNC viewer, the
ALIF 2112T must be connected to the video output of its host computer.