9
IN
sT
A
ll
A
TI
o
N
CONFIGURA
TION
OPERA
TION
FUR
THER
INFORMA
TION
INDEX
Video link
ALIF dual units can simultaneously support
up to two Single Link high resolution video
displays at pixel clocks up to 165MHz; or
can alternatively support a single Dual
Link very high Resolution video display at
pixel clocks up to 330MHz (equating to an
example display mode of 2560 x 1600 at 60
Hz refresh).
To make a video link
1 Wherever possible, ensure that power is disconnected from the ALIF and the host
computer.
2 Connect either one or two digital video link cables to the DVI-D socket(s) on the TX
unit rear panel:
Note: When using one very high resolution DVI-D dual link display, use a DVI-D
Dual Link cable (such as the supplied Adder part: VSCD3) to connect the primary
video port of the computer system to the DVI-D-1 connector of the ALIF dual. A
dual link cable must also be used at the RX unit.
COM
PUT
ER
DVI-D-1
DVI-D-2
To secondary video output port
To primary video output port
Note: When using two single
link DVI-D displays, connect
an additional video input from
the secondary video port of
the computer system using the
supplied secondary DVI-D link
cable.
COM
PUT
ER
DVI-D-1
DVI-D-2
To primary
video output
port
3 Connect the plug at the other end of the cable(s) to the corresponding DVI-D video
output socket(s) of the host computer.