32
INST
ALLA
TION
CONFIGURA
TION
OPERA
TION
fur
ther
inform
A
tion
INDEX
RX USB Settings
To get here
1 If not already connected, temporarily
connect the AdderLink Infinity unit and a PC via a network
.
2 Run a web browser and enter the IP address of the RX unit. Default:
http://169.254.1.32
If the address is unknown, perform a
manual factory reset
.
3 If necessary, click the
USB Settings
link.
Allow Human Interface Devices (HID) only
When enabled, this option restricts supported USB devices to keyboards and mice only. The use of memory
sticks and other devices is disabled.
Isochronous Endpoint OSD Alerts
The AdderLink Infinity USB system does not support Isochronous USB. When enabled, this option will alert the
user when an Isochronous USB device is connected.
Enable Isochronous Endpoint Attach
When enabled, this option will allow for an exchange of control information with an Isochronous device. Some
devices have multiple endpoints e.g. a keyboard with an audio controller. By enabling this option, the keyboard
functionality will work even though the isochronous audio functionality will not. Without this setting, the entire
keyboard would be rejected as it would be detected as being solely an isochronous device.
Port Reservation
This section allows you to map the four USB connectors on the receiver to a specific USB port that has been
reserved on the transmitter. It is useful if you have a specific device e.g. a touch screen that must be reported
to a specific USB port on the USB host device. See
Reserved Port Range
on the TX unit for further details.
Advanced features
This section is used for special configuration and is disabled by default. If a USB device fails to operate as
expected, this section allows special codes to be inserted to attempt to solve the issue.