manualshive.com logo in svg

ADC PHASE 6 OPL, Руководство пользователя, Страница: 13 / 68

Поделиться
Скачать
ADC PHASE 6 OPL Скачать руководство пользователя страница 13

10

F.  COOL DOWN CYCLE

Cool Down Cycle Selections:

1. Preprogrammed Cycles

a. Automatic Drying Cycle (Mode) 

(Patent No. 4,827,627)

1) Cool Down Time - 0 to 99 minutes in one-minute increments.

2) Cool Down Temperature - 70º F to 100º F in one-degree increments or from 20º C to 37º C in

one-degree increments.

b. Timed (Manual) Drying Cycle (Mode)

1) Cool Down Time - 0 to 99 minutes in one-minute increments.

NOTE:

The Cool Down Cycle will run either until the Cool Down Temperature is reached or until the
Cool Down Time has expired, whichever comes first.

2. Manually Loaded Cycles

a. Automatic Drying Cycle (Mode) 

(Patent No. 4,827,627)

1) Cool Down Time - 0 to 99 minutes in one-minute increments.

2) Cool Down Temperature - 70º F to 100º F in one-degree increments or from 20º C to 37º C in

one-degree increments.

b. Timed (Manual) Drying Cycle (Mode)

NOTE:

The Cool Down Cycle will run either until the Cool Down Temperature is reached or until the
Cool Down Time has expired, whichever comes first.

G.  L.E.D. DISPLAY

The light emitting diode (L.E.D.) display informs the user of cycle status, program verification, and displays
important diagnostic and fault codes.  A complete listing of the various display codes and their meanings are
shown on 

page 24

 of this manual.

Display Selections:

1. Display Status

a. While the dryer cycle is in progress, programming allows the L.E.D. display to read only the Cycle In

Progress or only the Basket (tumbler) Temperature.  Programming also allows a flash display whereby
the L.E.D. display will flash back and forth between Cycle In Progress and Temperature.

1) Both the Cycle In Progress and Temperature can be programmed to flash from 1-second to

15-seconds in one-second increments.

Содержание PHASE 6 OPL





































































Отзывы:

Нет отзывов