Confidential
8/11/2008
5
Fitting the External Antenna Kit
(optional)
5.1
139/140 Hardware
NOTE:
When looking at the FlexWave™ nano with the connections facing down and
the LED visible the antenna on the left is the Transmit antenna and the antenna on
the right hand side is the Receive antenna.
NOTE:
The RF feeder cable must not be bent sharply as this may result in a
degraded performance.
Remove the plastic covers by removing the top and bottom plates from both ends of
the FlexWave™ nano . Lever gently apart with screwdriver in notch.
A n te n n a C o v e r
T o p
A n te n n a C o v e r
B o tto m
N o tc h to a id
re m o va l o f
c o v e r
A n te n n a C o v e r
B o d y
Figure 2 - Removal of antenna covers
Remove the antenna cover body, by unscrewing the two Torx T20 screws retaining
© 2008 ADC Telecommunications, Inc.
Page 9