Confidential
8/11/2008
Drill the four holes in the positions marked previously and insert wall plugs (if
required) and fix the mounting bracket securely to the wall. The bracket is designed
to allow the FlexWave™ nano unit to be mounted with the connections at the bottom
of the unit.
Slide the FlexWave™ nano onto the bracket and ensure that the retaining spring
engages into the indent at the rear of the unit.
2
Locking Spring
1
TOP
Figure 14 - Mounting the FlexWave™ nano
When fixing to a ceiling or a sloping wall the same fixing process and clearances
should be observed as for fixing to a wall (at least 80mm from the bracket to the top
of wall and 120mm from the side of the bracket to a side wall). On a sloping surface
the top of the bracket
MUST
be uppermost. Once the unit has been attached to the
bracket the outer cover
MUST
be removed to expose the cooling vanes, as shown in
Figure 15 - Ceiling Mounted FlexWave™ nano
Figure 15 - Ceiling Mounted FlexWave™ nano
© 2008 ADC Telecommunications, Inc.
Page 17