background image

PARTS AND ASSEMBLY

This booklet contains operating and maintenance information for the DIAGNOSTIX

TM

7002 series digital e-sphyg

TM

. Please read and retain.

Your ADC DIAGNOSTIX

TM

e-sphyg

TM

digital aneroid sphygmomanometer consists of

a digital manometer (gauge), complete inflation system (ADCUFF

TM

calibrated nylon

cuff, latex inflation bladder, squeeze bulb, and the ADFLOW

TM

valve), a zippered

carrying case, and operating instructions.

DISPLAY EXPLANATIONS

1. Pressure:

Deflation Rate (During Measurement) /
Heartbeat Rate (After Measurement)

2. Heartbeat Mark

3. Deflation Rate

4. Calibration Reminder

5. Weak Battery Mark

INSTALLING AND REPLACING THE BATTERIES

1. Rotate the clip 180º. 

2. Loosen the screw on the battery cover using a coin

or screwdriver. 

3. Install the batteries with the polarities facing in

the correct direction. 

4. Replace the battery cover and tighten the screw. 

5. Rotate the clip back. 

Note:

You should replace the batteries if:

• The weak battery mark appears in the display.

• Nothing appears in the display when the power is switched 

on. The supplied batteries may be discharged earlier than 

store-bought batteries. Always replace both batteries together. 

STANDARDS

ADC’s digital aneroid sphygmomanometer is accurate to +/- 3 mmHg

and conforms to applicable sections of the following international standards:

EC council directive 93/42/EEC

EMC directive 89/336/EEC

EN 1060-1: 1995, Non-invasive sphygmomanometers - Part 1:

General Requirements

EN 1060-3: 1997, Non-invasive sphygmomanometers - Part 3:

supplementary requirements for electro-mechanical blood pressure measuring systems

ANSI / SP10

To ensure the reliable operation of this sphygmomanometer, use it in temperatures

ranging from 50° F (10° C) to 104° F (40° C).  The sphygmomanometer may be

stored in temperatures ranging from 14° F (–10° C) to 140° F  (60° C) at a relative

humidity of 10% to 90%.

CAUTIONARY NOTES:

Leaky batteries can damage the unit.

Remove the batteries when the unit will not be used for an extended period of time.

Your digital aneroid is a medical device designed for use by trained medical

professionals. Keep out of the reach of children.

Your digital aneroid is not field serviceable.

You should not use any tool to open the device nor should you attempt to adjust 

anything inside the device.

To stop the operation of your digital aneroid at any time, open the air release 

valve as you would on any mechanical blood pressure instrument, and the air in 

the cuff will be rapidly exhausted.

Your digital aneroid is designed for normal blood pressure measurement at the 

upper arm or thigh on healthy skin. Proper use of this device is essential for 

accurate measurement.

Do not inflate your digital aneroid unit to more than 300 mmHg.

If you have any problems with your digital aneroid, please contact

ADC’s Customer Service Department for assistance at: 1-800-ADC-2670.

1.

2.

5.

4.

3.

 

 

 

 

 

 

 

 

 

 

 

 

Содержание Diagnostix e-sphyg







Отзывы: