ADC Mobile
Car Show Installation Guide – GM Series
ADC Mobile Car Show GM1210 Multi-Media Navigation System Installation Guide
Page 2
PREPARING FOR THE INSTALLATION
Before you start, please read these critical steps below
STEP 1
BEFORE YOU START THE
INSTALLATION,
READ THIS GUIDE!
We know, you never read
the instructions, but you
need to read this BEFORE
you start the installation!
CHECK THE BATTERY
Test the battery voltage to make
sure it’s fully charged
This only takes seconds and can
save hours of troubleshooting
later.
TURN THE VEHICLE OFF
Keep the Vehicle Off during the
installation to avoid setting
various Vehicle Faults.
KEEP THE VEHICLE OFF
DURING THE
INSTALLATION
Failure to follow this may cause
the AIRBAG FAULT SENSOR to
become enabled. Dealer Service
Departments charge a significant
fee to reset the Fault Sensor.