4.6. ADC
®
Averaging Mode Technology
™ (6022, 6023 models only)
• In ADC
®
Averaging Mode Technology™, three measurements are automatically
taken in succession and the result then automatically analyzed and displayed. Be-
cause your blood pressure constantly fluctuates, a result determined in this way is
more reliable than one produced by a single measurement.
• After pressing the On/Off/Start button the selected ADC
®
Averaging Mode Technol-
ogy™ appears in the display as the symbol.
• The bottom right hand section of the display shows a 1, 2, or 3 to indicate which of
the 3 measurements is currently being taken.
4.3. Cuff tube connection
Insert the cuff tube into the opening on the left side of the
monitor indicated by the drawing of a cuff.
4.4. Select the Measuring Mode: Standard or
ADC
®
Averaging Mode Technology
™ (6022, 6023
models only)
This instrument enables you to select either standard (standard single measurement) or
ADC
®
Averaging Mode Technology™ (automatic triple measure-
ment). To select standard mode, push the switch on the side of the
instrument downward to Position “1” and to select Averaging Mode,
upwards to Position “3”. If you select 1 then only one measurement
will be taken. If you select 3, the unit will inflate and deflate three
times resulting in one final average measurement.
4.5.
Select the User
(6022, 6023 models only)
This blood pressure monitor is designed to store 99 measurements
for each of two users. Before taking a measurement, be certain that the correct
user has been selected.
a) With the unit off, press and hold the Time/Date button for 3
seconds until the user icon in the upper left corner of the LCD
screen flashes.
b) Press the Memory button to toggle between users.
c) Press the On/Off/Start button to make your selection.
10
1 3
