background image

C

ERTIFICATION

 

AND

 W

ARRANTY

L

IMITED

 W

ARRANTY

ADC DSL Systems, Incorporated (“ADC”) warrants that, for a period of sixty (60) months from the date of shipment, the hardware portion 
of its products will be free of material defects and faulty workmanship under normal use. ADC's obligation, under this warranty, is limited to 
replacing or repairing, at ADC's option, any such hardware product which is returned during the 12-month warranty period per ADC's 
instructions and which product is confirmed by ADC not to comply with the foregoing warranty.

ADC warrants that, for a period of 90 days from the date of purchase, the software furnished with its products will operate substantially in 
accordance with the ADC published specifications and documentation for such software. ADC’s entire liability for software that does not 
comply with the foregoing warranty and is reported to ADC during the 90-day warranty period is, at ADC’s option, either (a) return of the 
price paid or (b) repair or replace of the software. ADC also warrants that, for a period of thirty (30) days from the date of purchase, the media 
on which software is stored will be free from material defects under normal use. ADC will replace defective media at no charge if it is returned 
to ADC during the 30-day warranty period along with proof of the date of shipment.

The transportation charges for shipment of returned products to ADC will be prepaid by the Buyer. ADC will pay transportation charges for 
shipment of replacement products to Buyer, unless no trouble is found (NTF), in which case the Buyer will pay transportation charges.

ADC may use reconditioned parts for such repair or replacement. This warranty does not apply to any product which has been repaired, worked 
upon, or altered by persons not authorized by ADC or in ADC's sole judgment has subjected to misuse, accident, fire or other casualty, or 
operation beyond its design range.

Repaired products have a 90-day warranty, or until the end of the original warranty period—whichever period is greater. 

ADC DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED 
TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH 
RESPECT TO ITS PRODUCTS AND ANY ACCOMPANYING WRITTEN MATERIALS. FURTHER, ADC DOES NOT 
WARRANT THAT SOFTWARE WILL BE FREE FROM BUGS OR THAT ITS USE WILL BE UNINTERRUPTED OR 
REGARDING THE USE, OR THE RESULTS OF THE USE, OF THE SOFTWARE IN TERMS OF CORRECTNESS, 
ACCURACY, RELIABILITY OR OTHERWISE.

M

ODIFICATIONS

Any changes or modifications made to this device that are not expressly approved by ADC Telecommunications, Inc. may void the user's 
warranty.

All wiring external to the products should follow the provisions of the current edition of the National Electrical Code.

S

TANDARDS

 C

OMPLIANCE

The HRE-204 List 1 and List 2  have been tested and verified to comply with the applicable sections of the following standards.

GR 63-CORE - Network Equipment-Building System (NEBS) Requirements

GR 1089-CORE - Electromagnetic Compatibility and Electrical Safety

UL-1549 - Underwriters Laboratories

Содержание 150-204-100-03






























Отзывы: