manualshive.com logo in svg

ADB MIKADO, Руководство пользователя

Поделиться
Скачать
ADB MIKADO Скачать руководство пользователя страница 33

MIKADO USER MANUAL 

 

 

 

 

 

www.adblighting.com

 

User Manual - page 31 
Issue 1.0 
 

11.  MIKADO QUICK REFERENCE 

To see the type of object recorded in each memory tap [PAGE] to select the required page 
then, press and hold [page]. The submaster flash/assign buttons containing Memories will 
light, Submasters containing Chasers flash quickly and empty Submasters are not lit. When 
you press any [record] button or change [MEMORY] to "preview" or "edit" modes, all 
Submaster flash/assign buttons flash twice, then show their contents as above. If you 
change pages whilst in "edit", "preview" or "record" modes, the contents of each page is 
shown. 

 

11.1  RECORD A MEMORY 

To record the current output as a Memory in the current page, press [rec memory] [F/A] 
(Memory number). 
If the CROSSFADE rotary fader is set to a time other than zero, that time is recorded in the 
Memory and will be used when the Memory is played back. If the CROSSFADE is set to 
zero, no fade time is recorded and the CROSSFADE rotary fader can be used live when the 
Memory is played back. 
 

11.2  GRAB THE OUTPUT IN GRAB MASTER 

To record (grab) the current output into the Grab Master, press [record Memory] [F/A] (Grab 
Master).  
 

11.3 RECORD A CHASER 

To record a Chaser in the current page, press [record Chaser] [F/ A] (Chaser number). 
Each step of a Chaser consists of either a previously recorded Memory or a snapshot of the 
MIKADO output. 
 

•

  To add a Memory as a step, press [PAGE](optional) [F/ A] (Memory number). 

•

  To record a snapshot (of the current output) as a step, press [record memory] 

•

  Continue to add steps as above. 

 
If a SPEED or CROSSFADE rotary fader is active and set to a value other than zero, that 
value is recorded in the Chaser and will be used when the Chaser is played back. If a rotary 
fader is active and set to zero, no value is recorded for that rotary fader and it can be used 
live when the Chaser is played back. 
When all steps have been recorded, complete the Chaser by pressing [record Chaser]. 
 

11.4  SUBMASTER A MEMORY OR CHASER 

To replay a recorded Memory or Chaser, press [MODE] until the "memory" LED lights and 
press [MEMORY] until the "run" LED lights. If necessary, select the page containing the 
Memory or Chaser using [PAGE]. Fade up the Submaster containing the Memory or Chaser 
and also fade up the B Preset Master. 
 
MEMORIES  If no times are recorded in memory, rotate the [crossfade] fader until active to 

adjust fade times "live". 

 

Содержание MIKADO





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды