ADB M2123, Руководство пользователя

Страница: 18 / 40

ADB Wi-Fi Remote Control
Manual – page 16 www.adblighting.com
•
AP Name: the name you choose for the Access Point (e.g. AP UpStage
Left)
•
SSID
11
: the name you choose for the WLAN (e.g. Studio1)
•
Channels: your Channel number => You can change the setting to match
an existing wireless network (Default setting is channel 6)
•
WEP: Enabled / Disabled => Change the encryption settings, for more
secure wireless communication
•
WEP Encryption: select 64 Bit or 128 Bit
•
WEP Mode: HEX
•
Key: Enable key index 1 and give a key 1 => 64 bit = 10 digits
128 bit = 26 digits
Do not use the number shown in the example (1234567890).
Write down this WEP Key number; you will need it later on to configure the
Pocket PC.
Press Apply to finalize the setup of the Access Point.
Note: SSID => must be identical for all Access Points on the same network!
11
A service set identifier (SSID) is a sequence of characters that uniquely names a wireless local area network.
Issue: 1.03