ADB M2123, Руководство пользователя

Страница: 14 / 40

ADB Wi-Fi Remote Control
Manual – page 12 www.adblighting.com
8. Access Point setup
This chapter describes the setup for the D-Link DWL-2000AP Access Point. Other
Access Points may work but are not supported by ADB.
D-Link DWL-2000AP
8.1. Basic configuration
The Basic Configuration does not require any configuration of the Access Point itself.
It is the simplest set-up, but it has no privacy / security WEP
6
.
Supply the Access Point with 230 V.
Connect the Access Point with an Ethernet cable (standard or cross-link) to an ISIS
®
desk, or to an Ethernet Switch on your lighting network. Configuration is done.
SECURITY WARNING: This basic configuration has no privacy / security (WEP)!
8.2. Customized configuration
A Customized Configuration requires a PC with a Windows operating system. The
set-up procedure is for an Access Point set to its original factory default settings.
7
This includes IP address, password …
6
Wired Equivalent Privacy; a security protocol for wireless local area networks.
7
This Access Point has a Reset button to restore its original factory default settings; refer to the
D-Link DWL-2000AP User Manual.
Issue: 1.03