ADB IMAGO, Руководство по установке

Страница: 3 / 6

www.adblighting.com Quick Start - page 1
Issue 1.0
1. Installation and Overview
Delivery and Unpacking
As soon as you receive your equipment, open the boxes and inspect the items received. If
you discover any damage, contact the carrier immediately and make any necessary claim
for the problems discovered.
Box content:
1/ IMAGO unit
2/ 12 V Power supply, and power cable
3/ USB cable
Installing the Desk
The desk and the monitor should be installed on a table or a console.
The surface of your work area should be smooth, level and sturdy.
Make sure that there is enough clearance around the desk to:

open the desk

access the rear connections

allow air circulation around vents to prevent the desk from over-heating
Power Supply
The IMAGO has a universal power supply that will operate on voltages between 100 volts
and 260 volts with a frequency range from 50 to 60 Hz.
Before powering up the desk or any of its peripherals, check that the existing voltages are
within the limits defined.
THIS EQUIPMENT MUST BE EARTHED.
Note : all connections should be made with the power turned off; otherwise functioning
may be affected and can even damage the equipment under certain conditions .
Electrical Connection
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT OPEN THE DESK.
THERE ARE NO USER SERVICEABLE PARTS WITHIN. REFER SERVICING TO
QUALIFIED ENGINEERS ONLY. LETHAL VOLTAGES ARE PRESENT INSIDE!
ALWAYS DISCONNECT FROM THE POWER SUPPLY BEFORE OPENING FOR
INSPECTION.
Note : As all equipment used in computer systems, your system is sensitive to the
characteristics of the network and in particular to variations and voltage peaks.
Consequently, we advise you to use an appropriate line conditioner on this equipment.
Caring for your IMAGO
The IMAGO is manufactured from quality components and will give many years of service
if you take some basic precautions.

Do not allow any liquids or foreign objects to enter the IMAGO.

Do not apply excessive force to any of the controls. Spare parts and service are
available from your ADB distributor, but prevention is better than cure.

When connecting any devices to the IMAGO, make sure that all connections are
correct before switching on the power.