ADB Safegate RELIANCE Скачать руководство пользователя страница 18

Страница: 18 / 76

3.2 LED Apron Maneuvering

Compliance with Standards (current versions)

ICAO

Annex 14, Volume 1

IEC

61827

EASA

CS-ADR-DSN

Canada

TP 312

Australia

MOS 139

Uses

The RELIANCE

™

8-inch omnidirectional low-protrusion inset LED light fixture is provided with red or yellow LEDs. This fixture

can be used in the following applications:

•

Aircraft Stand Maneuvering Guidance

Features and Benefits

Efficiency

•

RELIANCE IQ with integrated intelligence

•

RELIANCE with integrated fail-open technology

•

Operates on CCRs designed in compliance with IEC or FAA requirements

•

Easy maintenance due to modular design, few mechanical parts

•

No visual flicker. PWM is used for some applications to optimize the LED performance and light fixtures

show no visual flickering.

Sustainability

•

Light-emitting diode (LED) technology that offers a long-lasting light source with low power consumption

•

IP68 protected, anodized aluminum housing designed for harsh weather environments (all fastenings in stainless steel)

•

Protected top cover for improved durability and protection from external forces

•

Compatible with existing infrastructure

•

Fixture compatible with all ADB SAFEGATE 8-inch bases

Safety

•

Light engine protected against towbar impact and high load upon maneuvering vehicles and aircrafts

•

Shorted LED detection according to FAA Engineering Brief No.67D

•

Available with IR as an option

Accessories

Refer to the RELIANCE inset user manual for 8-inch lights.

Power Supply

An integrated, encapsulated 6.6A electronic converter. Two-pole L-823 FAA Style 6 (2-pin) plug for connection to the

transformer. Power factor typically > 0.95 at 6.6 A. Power consumption 35 W.
French (flat 3-pin) plugs are also available for the French market.

RELIANCE Omni Light
General Information

8
Copyright

Содержание RELIANCE



































































Результаты поиска

Содержание RELIANCE

Отзывы:

Похожие инструкции для RELIANCE

Бренды по названию

Популярные бренды

ADB Safegate RELIANCE, Руководство пользователя

Результаты поиска

Содержание RELIANCE

Отзывы:

Похожие инструкции для RELIANCE

Бренды по названию

Популярные бренды