ADB Safegate RELIANCE Shallow Base Скачать руководство пользователя страница 17

Страница: 17 / 46

3.0 Introduction

RELIANCE

™

Shallow Bases are receptacles for inset lights for site requirements at airports. The bases are 8” and 12” in size and

are compatible with ADB SAFEGATE inset lights. It may be possible to use with other manufacturers light units, however

compatibility must be checked separately.

3.1 RELIANCE Shallow Base 8”-135 mm Base 12”-150 mm

•

Ground Fixing of 8" Inset Light Fittings (8" Base)

•

Ground Fixing of 12" Inset Light Fittings (12" Base)

3.2 Delivery of units

To meet every customers individual requirements, Base 8”/12” are delivered without basic accessories such as, cable-glands,

cables, wiring protection tubes earth fixing screws and nuts. Basic accessories and electrical connection kits for Base 8”/12”

must be ordered separately.

3.3 Overview of unit types

The different types of shallow bases supplied allow direct mounting of 8” and 12” inset light fittings. Options available for

bases do not affect what type of light unit that can be used. The difference is the type of cabling system and the light fitting

fixing system to be utilized (Metric/UNC, Bolts/Nuts).

3.4 Base options

This section describes the options available for bases. It is possible for options to be combined. For more information, contact

ADB SAFEGATE.

UM-0106, Rev. 1.0, 2019/12/19

Содержание RELIANCE Shallow Base







































Результаты поиска

Содержание RELIANCE Shallow Base

Отзывы:

Похожие инструкции для RELIANCE Shallow Base

Бренды по названию

Популярные бренды

ADB Safegate RELIANCE Shallow Base, Руководство пользователя

Результаты поиска

Содержание RELIANCE Shallow Base

Отзывы:

Похожие инструкции для RELIANCE Shallow Base

Бренды по названию

Популярные бренды