ADB Safegate FLA, Руководство пользователя

Страница: 13 / 20

3.0 Installation
This manual provides the detailed procedures required to safely and correctly install the Field Lightning Arrestor.
3.1 Introduction to Safety
CAUTION
Unsafe Equipment Use
This equipment may contain electrostatic devices, hazardous voltages and sharp edges on components
• Read installation instructions in their entirety before starting installation.
• Become familiar with the general safety instructions in this section of the manual before installing,
operating, maintaining or repairing this equipment.
• Read and carefully follow the instructions throughout this manual for performing specific tasks and
working with specific equipment.
• Make this manual available to personnel installing, operating, maintaining or repairing this
equipment.
• Follow all applicable safety procedures required by your company, industry standards and
government or other regulatory agencies.
• Install all electrical connections to local code.
• Use only electrical wire of sufficient gauge and insulation to handle the rated current demand. All
wiring must meet local codes.
• Route electrical wiring along a protected path. Make sure they will not be damaged by moving
equipment.
• Protect components from damage, wear, and harsh environment conditions.
• Allow ample room for maintenance, panel accessibility, and cover removal.
• Protect equipment with safety devices as specified by applicable safety regulations
• If safety devices must be removed for installation, install them immediately after the work is
completed and check them for proper functioning prior to returning power to the circuit.
Failure to follow this instruction can result in serious injury or equipment damage
Additional Reference Materials
Important Information
•
IEC - International Standards and Conformity Assessment for all electrical, electronic and related technologies
•
IEC 60364 - Electrical Installations in Buildings
•
FAA Advisory: AC 150/5340-26 (current edition) Maintenance of Airport Visual Aid Facilities
•
ANSI/NFPA 79, Electrical Standards for Metalworking Machine Tools.
•
National and local electrical codes and standards.
3.2 Inspection on Arrival
Please inspect the Field Lightning Arrestor upon arrival. Note any issues and contact the shipper.
96A0489, Rev. B, 2018/03/06 7
Copyright
©
2017–2018 ADB Safegate, All Rights Reserved