5
CASSETTE PLAYER UNIT
1. Eject control
2. Cassette slot
3. Direction indicators
4. Fast wind controls
Zone 1 & 2
In addition to the normal 100V line output there are two sets of 100V line terminals
for 2 zones which can be selected using the push buttons on the front panel
70V/25V Line
This system is common in the USA, it operates on exactly the same principals as
100V line except that at rated output the amplifier will have 70V RMS or 25V RMS on
its output terminals
Low Impedance (8
Ω
)
This output allows connection of standard low impedance loudspeakers, the
minimum load impedance must be 8
Ω
, when two or more loudspeakers are use
ensure that they are wired in such a way that the load impedance is between 8
Ω
and 16
Ω
.
CD OPERATION
1. Select CD mode with LINE select switch.
2. Press POWER key on CD player
3. Load disc (label side up) into player and PLAY starts automatically.
4. Press PAUSE key and symbol
appears in the display and play is suspended.
Press pause key to resume play.
5. Pressing
key selects the next track and
key the previous track
6. Press the RANDOM key, random appears in the display and tracks are played out
of sequence.
7. Press the REPEAT key once and the symbol
appears on the display and the
current track is repeated. When the key is pressed twice the symbol
appears
and indicates repeat play of the disc. To cancel these functions press the REPEAT
key.
8. Programming the CD player - in STOP mode.
(i)
Press the PROGRAM key
(ii) Use the next
or previous
key to select a track.
(iii) Press REPEAT key to memorise the selected track in you program. Repeat
stages (ii) and (iii) to program a maximum of 20 tracks.
(iv) Press the PLAY key to start the program (Note: The program repeats itself
until the CD player is stopped).
TUNER OPERATION
For FM reception connect a dipole aerial using 75
Ω
coaxial cable to the socket at the
rear of the unit. Connect the supplied antenna to the AM spring loaded terminals.
1. Select TUNER mode with the LINE select switch.
2. Select AM or FM with the BAND key.
3. Use the UP/DOWN keys to set a frequency manually or the SCAN key to
automatically search for the desired station.
4. To program a station press the ME (Memory) key.
5. Press a MEMORY key (M1 to M5) or SHIFT key and memory key (M6 to M10) to
store a frequency.
CASSETTE OPERATION
The cassette mechanism fitted into the cassette module is an auto-reverse
type which detects when the end of the tape has been reached and will
automatically reverse the direction of the tape and play the opposite side of
the cassette. This function will continue until the cassette is removed from
the module.
NOTE: Due to the abrasive nature of cassette tapes some oxide from the
tape will be deposited on to the cassette mechanism and therefore the
mechanism will need cleaning at reqular intervals. Cleaning cassettes can
be purchased from most good hi-fi stores. DO NOT use C120 cassettes.
Inserting a Cassette
The cassette should be inserted edge first with the exposed tape on the
right-hand side, push the cassette into the mechanism until the cassette
drops into position.
Removing the Cassette
Firmly press the eject button, the cassette will be ejected.
Fast Wind
The cassette can be fast wound in either direction to any position on the
tape by pressing one of the fast wind buttons.
Direction Change
The side of the cassette currently playing can be changed to play the other
side of the cassette at any time by pressing both fast wind buttons
simultaneously.
OPERATION MANUAL - ADASTRA PA5120 SERIES
GB
CD PLAYER UNIT
1. CD display
2. Repeat key
3. Random key
4. Program key
5. CD power on/off key
6. Previous key
7. Next key
8. Play/Pause key
9. Stop/Eject key
CD PLAYER
REPEAT
RANDOM PROGRAM POWER
PLAY
EJECT
STOP
PAUSE
1
2
3
4
5
7
8
9
6
1
2
3
4
Содержание PA5120RC
Страница 2: ...2 ...
