ADASH Ltd.
Adash 4900 – Vibrio III
22
Information line
After powering on the display shows measured data. Beyond descriptions of the measured values and
their actual values the display shows an information line in its upper part.
Fig. Information line on a display
Meaning of Displayed Symbols:
- moving “wave” signifies measurement in progress,
- setting of headphone output volume is indicated by yellow colouring of the
bars,
- this symbols shows an approximate battery status. The more is the symbol
filled in, the more battery power remains. If the status goes under 20 %, the remaining energy shows
in red, if it is insufficient, the symbol is red and the instrument switches itself off.
Battery status symbol:
100%
approx.
50%
under
20%
just before switching off
Using of Headphones
The instrument is equipped by a 0.5 W amplifier for connecting of headphones and listening to a
measured signal. We can connect the headphones by a stereo 3.5 mm jack marked phones on the top
of the instrument (see figure in the Connectors chapter). After connecting we can hear a signal from
the vibration sensor in the headphones. Advisable volume can be set-up by the VOLUME item from
the instrument menu (see MENU chapter)
Increase volume
button
Switch measuring
/ volume control
button
Decrease volume
button
